Fuji Xerox DocuPrint CM405 df, Руководство пользователя

Страница: 84 / 95

84
Barcode Settings
About Barcode Settings
This section explains about the types of compatible barcodes, designated character sets for barcode characters,
sizes of printed barcodes, etc.
NOTE:
• This guide assumes that the operator has a basic knowledge of barcodes.
„ Font Types and Character Sets
The table below lists compatible barcode types.
For the character set used to specify each barcode character, see
Character Set Tables on page 85.
See Barcode Sizes on page 91 for details about the size of printed barcodes.
NOTE:
• The printed barcode’s readability depends largely on factors such as the quality of paper used and performance of the
barcode reader.
Before using this product, we recommend you thoroughly test it under the conditions in which it will be used.
„ Sample Program and Output Results
A program that prints a sample of each type of barcode and a PDF showing the output results are provided. Use
these as a reference when printing barcodes.
• Location of the sample program and the output results PDF
Located in the [English] > [Manual] > [Barcode_Sample] folder on the PostScript Driver Library CD.
• Name of sample program name
sample.ps
• Name of output results PDF
sample.pdf
Barcode type PostScript font name Refer to the following table
JAN HitachiITHINJANH8-RG JAN Character Set Table (page 85)
Code 39 HitachiIT-C39H8 Code 39 Character Set Table (page 85)
NW7 HitachiITHINNW7H8-RG NW7 Character Set Table (page 86)
Code 128 HitachiITHINC128H8-RG Code 128 Character Set Table (page 86)
ITF
(without bearer bar) HitachiITHINITFH8-RG ITF (Interleaved 2 of 5)
Character Set Table (page 89)
ITF
(with bearer bar) HitachiITHINITFB-RG
Customer Barcode HitachiITHINPOSTBC-RG Customer Barcode Character Set Table
(page 90)
Font type PostScript font name
OCR B LetterPress M OCRBLetM