Print Driver Settings
75
Job Type Settings
This describes the settings in [Job Type].
NOTE:
• You can restore defaults by clicking [Defaults].
• Settings
Job Type
Specify the job type.
NOTE:
• For the DocuPrint CP405 d, [Secure Print] and [Sample Set] are available only when [Hard Disk] or [RAM Disk] is selected for
[Storage Device] in the device options.
• [Normal Print] *
Select to print normally.
• [Secure Print]
Accumulates data specified to be printed within the printer, and outputs by an instruction from the printer. Click
[Setup], and set each item on the [Setup] dialog box displayed.
• [Sample Set]
When printing multiple copies, you can print only one set initially to confirm the print result, and then the
remaining sets are output by an instruction from a printer. Click [Setup], and set each item on the [Setup] dialog
box displayed.
Setup dialog box
User ID
Enter the User ID for Secure Print and Sample Print. Enter the User ID within 8 characters.
Secure Print Passcode
Enter the Passcode corresponding to the [User ID] for Secure Print. The Passcode can be entered up to 12 numeric
characters. It will be displayed as bullets (•). This item is displayed only when [Secure Print] is selected for [Job
Type].
Содержание DocuPrint CM405 df
Страница 1: ...DocuPrint CM405 df CP405 d PostScript User Guide...
Страница 6: ...6 Using This Guide...
Страница 92: ...92 Barcode Settings...
