Wifi Setup
DocuPrint CM315 z
Connecting to
Setting up the
DocuPrint CM315 z
printer on a wireless
network
DPCM315z_QSG_P1
the Wireless
Network
1
WPS-PBC
Note: WPS-PBC (WPS Button), WPS-PBC (Operator Panel)
and WPS-PIN is only available when the wireless access
manual provided with the router.
point or router supports WPS-PBC. Please refer to the
Tap [Device] > [Network Settings] > [Wi-Fi] > [WPS].
2
(WPS Button)
Before starting WPS-PBC, confirm the position of the WPS
button on the wireless access point or router. Please refer to
the manual supplied with the router for more information.
1
Press the button.
When the message “Push WPS Button on router” is
displayed, start the WPS-PBC on the wireless LAN
access point (router) within 2 minutes.
3
The printer restarts automatically to complete the
wireless LAN connection setting.
Ensure you have the name of your wireless
network (SSID), wireless network password,
security and encryption types.
To find the name and type of security
encryption of your wireless network on
your computer (example Windows 7):
a) Go to the
Start Menu
. Select
Control
Panel
and click on
Network and
Sharing Centre
.
b) Click on
Manage Wireless Networks
.
Double click on your preferred wireless
network. Note the SSID. Click on the
security tab. Note the security
encryption type.
Ensure you have connected the Wireless
LAN Adapter to the rear of the machine.
See over page for instructions.
Before you begin
Tap [Device] > [Network Settings] > [Wi-Fi] > [WPS].
2
1
Press the button.
Tap [Connect via PIN].
Write down the eight-digit PIN code displayed on the
touch panel:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Make sure the message “Operate wireless router” is
displayed, and then enter the PIN code into the
wireless LAN access point.
3
2
WPS-PIN
This procedure requires access to the WPS-PIN functions
of your wireless access point (WAP) or router.
For further information please refer to the documentation
supplied with your wireless access point or router.
The printer restarts automatically to complete the
wireless LAN connection setting.
http://onlinesupport.fujixerox.com/
Tap [Device] > [Network Settings] > [Wi-Fi].
2
Tap the desired access point.
If the desired access point doesn’t appear, proceed to
“Manual SSID Setup”.
4
3
Tap [Wi-Fi Setup Wizard].
The printer searches
Enter the WEP key or passphrase.
If the encryption type of the selected access point is WEP:
a) Enter the WEP key using the keyboard, then tap [Next].
If the encryption type of the selected access point is WPA,
WPA2 or Mixed:
a) Enter the passphrase using the keyboard, then tap [Next].
5
The printer restarts automatically to complete the
wireless LAN connection setting.
1
Press the button.
3
Auto SSID Setup
Ensure you have the name of your wireless network (SSID),
wireless network password, security and encryption types.
For further information refer to
“Before you begin” at the start of this instruction.
.
