Fuji Xerox DocuPrint CM225FW, Руководство пользователя

Страница: 223 / 344

Using the Operator Panel Menus and Keypad 223
• Incoming Defaults
Purpose:
To configure settings for incoming fax.
Receive Mode
Purpose:
To select the default fax receiving mode.
Values:
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal
speaker when
Receive Mode
is set to
TEL/FAX Mode
.
Values:
Auto Answer Setup
Purpose:
To configure settings for automatic fax reception.
Values:
TEL Mode
Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external phone and then pressing the remote receive code, or by
selecting
Manual Receive
in
OnHook
to
On
(you can hear voice or fax tones
from the remote machine) and then pressing the ( Start ) button. For details
about
Manual Receive
, see "Receiving a Fax Manually in the TEL Mode" on
page 188.
FAX Mode
* Automatically receives faxes.
TEL/FAX Mode
When the printer receives an incoming fax, the external telephone rings for the
time specified in
Auto Receive TEL/FAX
, and then the printer automatically
receives a fax. If an incoming call is not a fax, the printer beeps from the internal
speaker indicating that the call is a telephone call.
Ans/FAX Mode
The printer can share a telephone line with an answering machine. In this mode,
the printer will monitor the fax signal and pick up the line if there are fax tones. If
the phone communication in your region is serial, this mode is not supported.
DRPD Mode
Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive
ring service must be installed on your telephone line by the telephone company.
After the telephone company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for that specific ring
pattern.
Off
Turns off the volume of the ring tone.
Min
Sets the volume of the ring tone to minimum.
Middle
Sets the volume of the ring tone to middle.
Max
* Sets the volume of the ring tone to maximum.
Auto Answer Fax 0
* Sets the interval at which the printer goes into the fax receive mode after receiving
an incoming call. The value is set in increments of 1 second.
0-255
Auto Answer
TEL/FAX 6
* Sets the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call. The value is set in increments of 1
second.
0-255
Auto Answer
Ans/Fax 21
* Sets the interval at which the printer goes into the fax receive mode after the
external answering machine receives an incoming call. The value is set in
increments of 1 second.
0-255