Fuji Xerox DocuPrint CM225FW, Руководство пользователя

Страница: 132 / 344

132 Copying
 Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original.
1
Select the
Quality
tab, and then select
Sharpness
.
2
Select the desired setting, and then select
OK
.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
 Auto Background Suppression
To suppress the background of the original to enhance text on the copy.
1
Select the
Quality
tab, and then select
Auto Background Suppression
.
2
Select the desired setting, and then select
OK
.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
 Collated
To sort the copy output. For example, if you make two sets of a three-page document, the first set will be printed
followed by the second set.
1
Select the
Output
tab, and then select
Collated
.
2
Select the desired setting, and then select
OK
.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
When you are using the document glass and it is set to
Collated
, the display prompts you for another page
after pressing the ( Start ) button.
a
If you want to place a new document, replace the document with a new document, and then select
Scan
Another Page
or press the ( Start ) button.
b
If you finish copying, select
Done. Print Now
.
Sharpen2
Makes the copy sharper than the original.
Sharpen1
Normal
* Does not make the copy sharper or softer than the original.
Soften1
Makes the copy softer than the original.
Soften2
Off
On
*
Uncollated
* Does not copy in collated order.
Collated
Copies in collated order.