Fuji Xerox DocuPrint C5155d, Руководство пользователя

Страница: 113 / 433

4.2 Loading Paper
113
Loading paper into Trays 1 through 4
As a standard feature, Tray 1 (Standard Tray) is installed to this printer. You may also use Tray 2
when 1 Tray Module (optional) is installed, or use Tray 2 to 4 when 3 Tray Module (optional) is
installed. This section describes how to load paper into Tray 1 as an example.
Important
• Do not load paper to the 2-tiers of trays or more that are pulled out and remain open. If some force is added to
the machine from its back side, the machine may get inclined and turn over, which may cause injuries.
1. Pull out the tray until it stops.
2. Squeezing 2 (top and side) guide clips, slide
them to the positions until they fit to the
paper size.
3. Load the paper with its print side facing up
and its leading edge aligned with the left side
of the drawer.
Important
• Do not load paper of different types into the tray. Doing
so can cause paper jams.
• Do not load paper above the maximum fill line (the
position “MAX”). It may cause paper jams or machine
malfunction.
• Do not place any paper or objects in the empty space on
the right side of Trays 1 to 4. It may cause paper jams.
4. Gently slide the tray back in as far as it will go.
Important
• When inserting the tray, push it gently. Forcibly pushing
the tray in may cause machine malfunction.