Fuji Xerox DocuPrint C4350, Руководство пользователя

Страница: 50 / 369

Setting up the P
rinter
Envir
o
nm
ent
20
1
1.5
About Allocation of
Memories
This section describes allocation of memories.
Memory allocation for this printer is shown in the table below.
Yes : Supported
HDD: Not supported when an internal hard disk drive (option) is installed.
When an optional internal hard disk drive is installed, you can select [Hard Disk] for the LPD, SMB, or IPP receive
buffer (spool) settings. Select [Hard Disk] as required.
Except for the print page buffer, you can allocate memory using the control panel or Centre-
Ware Internet Services. The memory allocation setting takes effect after the power is turned
off and then on (or at system resetting).
●
For details on memory capacities and the initial spool capacity, refer to "7.2 Description of Common
Menu"(P.256).
●
For how to use CentreWare Internet Services, refer to "5.1 Configuring the Printer from the Computer (Centre-
Ware Internet Services)" (P.96).
Print Page Buffer
This is the area for drawing the actual print image. The area to be allocated to
the print page buffer will be the area remaining after memories have been allo-
cated for other purposes. Accordingly, the capacity of the print page buffer can-
not be changed directly. The actual capacity allocated to the print page buffer
can be checked under [Memory] in the "System Settings List".
To print high-resolution documents, reduce the capacities of the memories allo-
cated to unused items to increase the capacity of the print page buffer.
●
For how to print the "System Settings List", refer to "5.6 Printing Report/List" (P.152).
●
You can check the capacity of the print page buffer using CentreWare Internet Services.
For details on CentreWare Internet Services, refer to
"
5.1 Configuring the Printer from the
Computer (CentreWare Internet Services)
"
(P.96)
.
Memory type Standard
Print page buffer Yes
HPGL auto layout memory HDD
PS memory Yes
Receive buffer capacity Yes