Fuji Xerox DocuPrint C4350, Руководство пользователя

Страница: 45 / 369

Setting up the P
rinter
Envir
o
nm
ent
15
1
1.4
Setting the Port
After setting the IP address or checking the setting, enable the port and set the transport
protocol as required.
This section describes the procedure for setting the port status to [Enable], the procedure
for setting the SNMP agent status (Default: Enable) to [Enable], and the procedure for
enabling the SMB port and transport protocol.
The SNMP agent is enabled to use the remote printer management software such as Cen-
treWare.
The SMB port is enabled to use this printer under the Windows network (SMB) environment.
The port can be set from CentreWare Internet Services. For more information, refer to "5.1
Configuring the Printer from the Computer (CentreWare Internet Services)" (P.96).
1.4.1
Enabling the Port
This section describes the procedure for enabling the LPD port.