Fuji Xerox DocuPrint C4350, Руководство пользователя

Страница: 115 / 369

Pri
n
ti
n
g
85
4
4.12
Printing PDF Files Directly
(ContentsBridge)
As this printer is provided with ContentsBridge, you can send PDF files directly to the printer
without using the print driver. Since the print data is sent to the printer directly, you can print
data more easily and faster than when using the print driver. There are the following two
ways to print PDF files.
■ Using ContentsBridge
You can print PDF files in either of the following ways: using our ContentsBridge utility or
sending files directly to the printer using an lpr command.
For information about using the ContentsBridge utility, refer to "4.12.1 Printing PDF Files Using the Contents-
Bridge Utility" (P.86). For information about using an lpr command, refer to "4.12.2 Printing PDF Files without
Using the ContentsBridge Utility" (P.89).
■
Using the PostScript feature
You can use the PostScript feature to send PDF files directly to the printer.
When using the PostScript feature to print PDF files directly, set [Print Mode] of [PDF] on the control panel to
[PS] with reference to “7.2.1 Print Language Setting" (P.256) and then print the files with reference to “4.12.2
Printing PDF Files without Using the ContentsBridge Utility" (P.89).
When printing PDF files directly using the USB or parallel port, use the ContentsBridge utility.
PDF files that can be printed
PDF files created with Adobe Acrobat 4 or Adobe Acrobat 5 (except for some
functions added in PDF 1.4) can be printed directly.
Some PDF files cannot be printed directly depending on how they have been created. In such a case,
open the PDF file and print it using the print driver.