manualshive.com logo in svg

Fuji Xerox DocuPrint C1110 B, Руководство пользователя, Страница: 103 / 209

Поделиться
Скачать
Fuji Xerox DocuPrint C1110 B Скачать руководство пользователя страница 103

6.1 Clearing Paper Jams

103

5.

Remove any jammed paper. Make sure no 
torn pieces remain inside.

6.

Close the front cover.

Important

• When closing the front cover, be careful not to get your 

fingers caught between (the left, right, top, or bottom 
edge of) the cover and the printer.

7.

Push the tray all the way into the printer.

Important

• When inserting the tray, be careful not to get your 

fingers caught between the tray and the printer.

Paper Jams in the Fuser Unit

Important

• The fuser is hot. Do not touch areas with labels indicating high temperature and those surrounding the 

labels. Otherwise, you can get burnt.

• To protect the drum cartridge from exposure to bright light, close the front cover within 3 minutes. If the 

front cover remains open for more than 3 minutes, print quality may deteriorate.

• Make sure that nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, 

dirt, or oil from your hands on the film of the belt unit may reduce print quality.

1.

Push the side button (right side) and open 
the front cover.

Содержание DocuPrint C1110 B


















































































































































































































Отзывы:

Нет отзывов