Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 67 / 556

Image Quality
65
Copy
3
Color Balance (Adjusting Color Balance)
The strength of the four colors (yellow, magenta, cyan, and black) can be adjusted in
seven levels for each of their low, medium, and high density ranges.
Note • If [Color Balance] is selected when Image Quality Preset is set, the Image Quality Preset
setting values are cleared.
1
Select [Color Balance].
2
Select the button for the color you
want to adjust.
3
Use [ ] and [ ] to adjust the color
balance for each density.
„
Low Density
Use this item to adjust the strength of the low density.
„
Medium Density
Use this item to adjust the strength of the medium density.
„
High Density
Use this item to adjust the strength of the high density.
Color Shift (Adjusting Color Tone)
The tone of color documents can be adjusted to make subtle changes to the overall
tone of the document. You can adjust the tone two levels at a time by moving the bar
to the left or right.
The bottom bar of the [Color Shift] screen indicates the tone of the document and the
upper bar indicates the tone after adjustment. If you press a color shift button, you can
move the lower bar to change the overall tone of the document to the tone of the upper
bar.
For example, if Y (yellow) on the lower bar is moved to the left towards R (red) on the
upper bar, the yellow in fruit becomes reddish to give an apple a riper-looking tone. This
changes all colors. For example, R (red) becomes more M (magenta) and G (green)
becomes more Y (yellow).
If Y (yellow) on the lower bar is moved to the right towards G (green) on the upper bar,
the yellow in fruit becomes greener. This changes all colors. For example, M (magenta)
becomes more R (red) and R (red) becomes more Y (yellow).
Note • Confirm that [Full Color] is selected in [Output Color] of the [Basic Copying] screen. Tone
adjustment is not possible when Output Color is set to [Black].
• If [Color Shift] is selected when Image Quality Preset is set, the Image Quality Preset setting
values are cleared.
1
Select [Color Shift].
2
Select the color shift buttons.