Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 353 / 556

Login Setup/Auditron Administration
351
Setups
11
Fax Billing Data
This section describes the settings for the fax billing.
In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Administration prior to the operations.
For information about how to enable the feature, refer to "Auditron Mode" (P.352).
Set the communications time per unit charge in each time band (daytime/night/late night) in [Billing].
For information about the settings in [Billing], refer to "Billing - Day Time, Billing - Night Time,
Billing - Late Night Time" (P.338).
1
Insert the card, and enter System
Administration mode.
2
Select [Fax Billing Data].
3
Select [Change Settings].
4
Using the keyboard displayed on
the screen or the numeric keypad,
enter the charges.
5
Select [Save].
Password Entry from Control Panel
Set whether a password is input when the system administrator or a user is using the
machine.
Select [On], to enable "Password" (P.345) for "System Administrator Password"
(P.343) and [Create/Check User Account].
Select [Off] to not require the password, even if it is set in the above procedures.
Important • The setting of [Password Entry from Control Panel] is used for verification on the machine.A
password must always be input when are using CentreWare Internet Services or other
remote access, regardless of the use of password setting. Depending on verification
procedures, a password may be required for other processes as well.
Note • The system administrator password is also used to change settings from CentreWare
Internet Services.
Login Setup/Auditron Mode
Set whether the Auditron administration feature is enabled or not, and whether to
request an authentication operation.
1
Select [Login Setup/Auditron
Mode].
2
Select any item.
Off
To operate the machine requires no user login setup/Auditron administration.
Note • Even if [Auditron Mode] and [Mailbox Access] are set to [On], this does not feature.