Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 339 / 556

Setup Menu
337
Setups
11
Delayed Start
You can set whether or not to use a delayed start transmission.
1
Select [Off] or [On].
2
If you selected [On], select [AM] or
[PM], then set the time with [
]
and [ ].
If the time in the system clock of the machine is set to display in the 24-hour clock, [AM] and [PM] do
not appear. For information about the system clock, refer to "Time" (P.254).
Remote Mailbox
Select whether to use mailbox communications. Note that when using mailbox
communications, the other party's mailbox number and password must be set in
advance.
1
Select [Off] or [On].
2
If you selected [On], with the
numeric keypad enter the other
party's box number, and select
[Next].
3
If a password is set, enter the password with the numeric keypad, and select [Next].
Note • If no password is set, do not input anything, and select [Next].
F Code
Select whether to use F code communications.
F code communications is a communications protocol agreed by the information
communications network industrial body, as a way of using the T.30 (a communications
standard) subaddresses standardized by ITU-T.
The F code (subaddress) and password use not more than 20 digits 0 to 9, *, and #.
1
Select [Off] or [On].
2
If you selected [On], with the
numeric keypad enter the F code,
and select [Next].
Note • The F code consists of "0" +
mailbox number. For example,
if the mailbox number is 123,
the F code is "0123".
3
Enter the password as required with the numeric keypad, and select [Next].
Note • You can enter up to 20 digits for the password.
Relay Broadcast
When the machine is used as a relay station in a relay broadcast, set the
specifications to be send to the relay station when the a registered address book entry
is used for the relay station. When set to [Enabled], set [Relay Station ID], [Broadcast
Recipients], and [Print at Relay Station].