Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 317 / 556

E-mail/iFax Settings
315
Setups
11
Address Search (Directory Service)
Set the attributes and ranges for searching address books stored in the address search
(directory service).
Note • This feature only supports address book used with the e-mail scan feature.
1
Select [Address Search (Directory
Service)].
2
Select the item to be set, and
select [Change Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Select the setting value.
4
Select [Save].
Directory Service (LDAP)
Select whether to allow the use of address books stored on the directory server.
z Even when [Enable] is selected, unless the following conditions are met the directory
server address book will not be started.
- The IP address must be correctly set
- The directory server (primary) IP address or FQDN must be set
- The port number used for LDAP communications must be set
Primary Server
Make the directory server settings.
1
Select [Primary Server].
2
Select the item to be set, and
select [Change Settings].
3
Set the setting value.
„
Primary Server Setup
You can select the primary server specification method from [By IP Address] and [By
Server Name].
„
Primary Server IP Address
Set the primary server IP address, using values from 0 to 255.
Note • You can set this when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
„
Primary Server Name
You can set the server name for the primary server. You can enter up to 64 characters.
Note • You can set this when [Primary Server Setup] is [By Server Name].
Primary Server Port Number
Set the directory server port number in the range from 1 to 65535.