Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 308 / 556

11 Setups
306
Setu
ps
11
Receiving Paper Size
You can set the method of notifying the paper size on which the received document will
be printed, from the receiver to the sender.
1
Select [Receiving Paper Size], and
select [Change Settings].
2
Select [Tray Mode] or [User Mode].
3
If you pressed [User Mode], select
any paper size.
„
Tray Mode
The paper (plain paper only) loaded into any of the trays can be used for printing. The
received document is printed on the paper size available in the trays and closest to the
same size as the original without losing any of the page.
„
User Mode
The paper size to be printed is specified (declared), and regardless of whether it is
loaded into a tray, only the declared size paper is used for printing. You can select more
than one paper size.
2 Up On Receipt
You can set to have two received pages printed combined on one sheet. This is
convenient for saving paper.
For example, when two A5 pages are received, they are printed on a single A4 sheet.
However, if paper of the same paper size as the received document is declared, it is
printed on that size. Depending on the sizes of the received documents, multiple-up
receiving may not be possible.
2 Sided Printing
Set whether to print received fax documents (including iFax received documents) 2
sided. This is convenient for saving paper.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Even if you select [Yes], depending on the data, 2 sided printing may not always be possible.
Border Erase - Top & Bottom
Set the amount of border erased from the original in the top and bottom directions. Set
a value from 0 to 20 mm in 1 mm increments.
Border Erase - Left & Right
Set the amount of border erased from the original in the left and right directions. Set a
value from 0 to 20 mm in 1 mm increments.
Reducing 8.5×11" Originals to A4
When [Reduce/Enlarge] in the [Scan Options] screen is set to [Auto %], you can set
whether to
reduce 8.5 × 11" size to A4, while scanning the original.
Pseudo-Photo Gradation Mode
You can set the toning method for photo originals. To get closer to photo image quality,
select the handling of intermediate tones (gray). You can select from [Error Diffusion]
and [Dither].