Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 170 / 556

5 Scan
168
Scan
5
3
In the screen that appears, check the [Recipient Name], [Server Name/IP Address],
[Login Name], [Password], etc.
Important • You can only use recipients configured for SMB or FTP. Fax recipients, etc. are not
available.
For information about configuring the Address Book, refer to "Address Book" (P.334).
Detailed Settings
Here you can rename files and configure processing for conflicting filenames.
1
Select [Detailed Settings].
2
When changing the [File Name],
select [File Name], select [Change
Settings], and then enter the new
File Name in the next screen. To
delete, select [Clear Field].
3
When changing the [File Name
Conflict], select [File Name
Conflict], select [Change Settings],
and then change the settings in the
next screen.
Note • Up to 28 characters are
allowed for [File Name].
[File Name Conflict] Screen
„
Cancel Job
If a file of the same name already exists in the forwarding destination, cancel the job
and do not save.
„
Change Name and Save
If a file of the same name already exists in the forwarding destination, automatically
change the file name and save. This adds a number from 0001-9999 to the end of the
file name.
„
Overwrite Name and Save
Replace the existing file with the new one and save.
Delete
You can delete each forwarding destination field.
1
Select the field to delete, and select
[Clear Field].