Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 128 / 556

4 Fax
126
Fax
4
Priority Send/Delayed Start (Setting Send Priority/Specifying Send Time)
If you set the send priority, you can send faxes prior to stored documents or use the
polling feature.
You can specify the time to begin sending a fax. This feature is convenient for sending
faxes at nighttime when call charges are low.
Note • This feature is unavailable for iFax.
• If the Priority Send feature is selected during transmission, the fax will be sent after the
current transmission ends.
• This feature can be set in combination with Delayed Start. If both features are set, Priority
Send is performed at the set time.
• In redial mode, the fax will be resent preferentially after the set redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-
polling jobs.
You can give priority to a pending job. For information about the operating procedure, refer to
"Checking Executing/Pending Jobs" (P.357).
Important • If a power failure occurs or the power is turned off when the Delayed Start feature is set, the
setting is cleared and transmission begins as soon as the power is turned on.
Note • You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set Delayed Start separately for each Address Number. For information about how
to register Address Numbers, refer to "Address Book" (P.334).
• If Address Number or group dial numbers are dialed with the Broadcast Send feature, the
Delayed Start setting specified for each Address Number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is
busy, it will be sent as soon as the line becomes available.
• Our customer engineers can change the Delayed Start default value.
1
Select [Priority Send/Delayed Start]
on the [Send Options] screen.
2
Select "On" of "Priority Send" to set
Priority Send and select "On" of
"Delayed Start" to set Delayed
Start.
For Delayed Start, select "Start
Time" and configure the hour and
minute settings on the next screen.
Important • If you press the <Start> button after the specified time elapses, the stored document will be
sent at the specified time the next day.