Fuji Xerox DocuCentre-VI C2264, Быстрая справка для англоязычных пользователей

Страница: 83 / 129

Loading Paper
83
P
a
pe
r an
d Ot
her M
e
di
a
4
Important • Do not load paper above the maximum fill line ("MAX" in the right figure). It may cause paper jams
or machine malfunction.
• Do not place any paper or objects in the empty space on the right side of Trays 1 to 4. It may cause
paper jams or machine malfunction.
3
Push the tray in gently until it stops.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine malfunction.
Loading Paper in Tray 5 (Bypass)
When printing or copying on a size or type of paper that cannot be set in Trays 1 to 4, use
Tray 5. The following describes the procedures to load paper in Tray 5. For printings, specify
the instructions using the [Paper/Output] tab in the print driver. Also specify the type of
paper to be loaded.
1
Open the Tray 5 (Bypass).
Note • If necessary, pull out the extension tray. The extension tray can be extended in two stages. Pull out
the extension tray gently.
2
Load paper with the side to be copied or printed on facing down, inserting the paper until
its edge lightly touches against the paper feed entrance.
Important • Do not load mixed paper types into the tray.
• Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction.
• When making copies or prints on thick-stock paper and the paper will not feed into the machine,
apply a curl to the paper as shown in the figure below. Note, however, that excessively bending or
folding the paper may cause paper jams.
• Depending on the type of the heavyweight paper, paper may not be fed to the machine or image
quality may deteriorate.