Fuji Xerox DocuCentre S2220, Руководство пользователя

Страница: 21 / 311

Safety Notes
21
Bef
ore
Us
ing
the
M
a
ch
ine
1
Others
Operational Safety
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji
Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in the
following environment:
Temperature: 10 - 32°C
Humidity: 35 - 85%
When the product is left in a chilly room and the room is rapidly warmed up by
heater, dew condensation may form inside the product and cause a partial
deletion on printing.
The operator's product maintenance procedures are described in the customer
documentation supplied with this product. Do not carry out any other maintenance
procedures not described in the documentation.
This product features safety design not to allow operators access to hazard areas.
The hazard areas are isolated from operators by covers or protectors which require
a tool to remove. To prevent electric shock and injuries, never remove those covers
and protectors.
To avoid the risk of electric shock and a fire accident, switch off and unplug the
product promptly in the following conditions, then contact your local Fuji Xerox
representative.
z The product emits smoke or its surface is unusually hot.
z The product emits unusual noise or odor.
z The power cord is cracked or worn down.
z A circuit breaker, fuse or any other safety device becomes activated.
z Any liquid is spilled into the product.
z The product is soaked in water.
z Any part of the product is damaged.
Do not insert any object into slots or openings of this product.
Do not put any of the followings on the product:
z Liquid container such as flower vases or coffee cups
z Metal parts such as staples or clips
z Heavy objects
If liquid is spilled over or metal parts are slipped into the product, it may cause
electric shock or a fire accident.
Do not use conductive paper such as origami paper, carbonic paper or conductively-
coated paper. When paper jam occurs, it may cause short-circuit and eventually a
fire accident.