Fuji Xerox DocuCentre S2110, Руководство пользователя

Страница: 74 / 229

Loading Paper
74
Loading Paper
4
5
Push the tray in gently until it stops.
Important
z
When pushing the tray in, do it slowly. If the tray is pushed with too much force, it may cause machine
malfunctions.
z Push the tray in all the way until it stops to prevent paper jams.
Loading Paper in Bypass Tray
When printing or copying on the paper that cannot be set in Tray 1 or 2, use the Bypass
tray. The following describes the procedure for loading paper into the Bypass tray. For
printing, specify the settings on the [Paper/Output] tab using the print driver. Also specify
the type of paper to be loaded.
Important
z To prevent paper jams or loading errors, do not remove paper from its packaging until needed.
Note
z Fan the stack of paper well before loading paper in a tray. It prevents paper from sticking to each other and
reduces paper jams.
1
Open the Bypass tray.
Note
z If necessary, pull out the extension tray. Pull out the extension tray gently.
2
Load paper with the side to be copied or printed on facing down, inserting paper until its
edge lightly touches against the paper feed entrance.
Important
z
Do not load mixed paper types in a tray.
z
Do not load paper above the maximum fill line. It may cause paper jams or machine malfunctions.
z The machine may not be able to feed or create the desired print quality for some types of heavyweight
paper.