Fuji Xerox DocuCentre S2110, Руководство пользователя

Страница: 30 / 229

Environment Settings
30
Environme
n
t Se
ttings
2
[Properties] Tab
Description
„
Machine Model
The product name is displayed.
„
Serial Number
The product serial number is displayed.
„
Machine Name
You can enter the printer name (between 1 and 32 ASCII code characters excluding colons
(:), equal signs (=), at symbols (@), or asterisks (*), which are not valid).
„
Location
You can enter the machine's location (up to 255 ASCII code characters).
„
Contact Person
You can enter the contact person's information (up to 255 ASCII code characters).
„
Administrator's E-mail Address
You can enter the e-mail address of the system administrator (up to 128 characters).
„
Comment
You can enter machine comments (up to 255 ASCII code characters).
„
[Apply] button
You can apply changes by pressing this button.
Usage Counters (General Setup)
You can check the total number of pages printed for each service.
Power Saver Settings (General Setup)
„
Time to Low Power Mode
You can set the time elapse from the last operation until the machine enters Low Power
mode. You can set a value between 1 and 60 minutes. (Default: 1)
„
Time to Sleep Mode
You can set the time elapse from Low Power mode until the machine enters Sleep mode.
You can set a value between 1 and 239 minutes. (Default: 1)
„
[Apply] button
You can apply changes by pressing this button.
Port Settings (Connectivity)
„
Port
You can activate or deactivate communication ports. You can select from SNMP, LPD,
Port9100, and Network TWAIN. Activate each port by checking its checkbox.