Fuji Xerox DocuCentre S1810, Руководство пользователя

Страница: 70 / 202

4 Loading Paper
70
L
o
ad
ing P
ape
r
4
Paper Types
This section describes the paper types supported by the machine.
Use of non-recommended paper types may result in paper jams, lower print quality,
malfunctions, or damage to the machine. To achieve optimum machine performance,
use only paper types recommended by Fuji Xerox.
If you desire to use paper other than the paper recommended by Fuji Xerox, contact
our Customer Support Center.
Important • Moisture generated by water, rain, or vapor may cause the printed images to fade. For more
information, contact our Customer Support Center.
Supported Paper Weights and Sheet Counts
Important • Paper jams may result if you attempt to print on a different paper type or size than the type
or size selected in the print driver, or from a tray that does not support the loaded paper.
Select the correct paper size, type, and tray to ensure successful printing.
Note • Basis weight is the weight of one sheet of paper of 1 m
2
in size.
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 × 1,091 mm) paper.
„ Supported paper sizes:
z
Maximum: A3, 11 × 17"
z
Minimum: Tray 1 and 2: B5, Bypass tray: A5, 5.5 × 8.5"
WARNING
Do not use conductive paper such as origami paper, carbonic paper or
conductively-coated paper. When paper jam occurs, it may cause short-circuit and
eventually a fire accident.
Paper Tray Basis Weight/Ream Weight Loadable Quantity
Tray 1 (standard) 60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg 250 sheets *
1
(Up to 27 mm)
Tray 2
(One Tray Module
(optional)) 60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg 500 sheets *
1
(Up to 54 mm)
Bypass tray 60 to 110 gsm
Ream Weight: 51.6 - 94.6 kg 100 sheets *
2
(Up to 10 mm)
*
1
: When using 80 gsm paper
*
2
: When using Fuji Xerox standard paper