Fuji Xerox DocuCentre S1810, Руководство пользователя

Страница: 144 / 202

10 Maintenance
144
M
ainte
na
nc
e
10
Cleaning the Machine
This section describes how to clean the machine such as the outer casing, document
cover, document feeder and document glass.
Cleaning the Exterior
The following describes how to clean the exterior of the machine.
Important • Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the
machine as they might discolor, deform, or crack covers.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
1
Wipe the exterior with a firmly wrung soft cloth
moistened with water.
Important • Do not use cleaning agents other than
water or neutral detergent.
Note • If you cannot remove the dirt easily, gently
wipe the machine with a soft cloth
moistened with a small amount of neutral
detergent.
2
Wipe off any excess water with a soft cloth.
Cleaning Document Cover and Document Glass
If the document cover and document glass become soiled, smudges may appear on
copies, or scanned documents and the machine may not properly detect document
sizes.
To ensure clean copies at all times, clean the document cover and the document glass
about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, or scanning.
WARNING
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never use
aerosol cleaners to avoid catching fire and explosion.
CAUTION
When cleaning this product, always switch off the power and unplug it. Access to a
live machine interior may cause electric shock.