Fuji Xerox DocuCentre-IV C2263, Руководство пользователя

Страница: 201 / 443

Fax/Internet Fax
201
Fa
x
4
Original Type (Selecting the Document Type)
You can select the type of the original document, such as text and photo documents.
1
Select the original type.
„
Text
Select this option when transmitting a document that contains only text.
„
Photo & Text
Select this option when transmitting a document that contains both text and photos. The
machine automatically distinguishes the text and photo areas and sets the appropriate
image quality for each area of the document.
„
Photo
Select this option when transmitting a document that contains only photos.
Note • If reduced in size, the scan documents may have stripes in their photo areas.
Resolution (Specifying the Scanning Resolution)
You can set the resolution for the documents to be scanned.
Note • The machine scans a document at the specified resolution, but if the recipient's machine does not
support the resolution, the machine automatically changes the resolution to one supported by the
recipient's machine and there is a corresponding loss in quality.
• The higher the resolution, the lower the transmission speed. Usually, we recommend that you select
[Superfine (400 dpi)] or lower.
• Only [Fine (200 dpi)] is available for the Server Fax service.
You can specify the resolution for each address number. For information on how to register address numbers, refer to "5
Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
1
Select the resolution.
„
Standard (200 x 100dpi)
Select this option when transmitting standard documents.
(Approx. 200 x 100 pels/25.4 mm)
„
Fine (200 dpi)
Select this option when transmitting documents with small text or detailed images.