Fuji Xerox DocuCentre-IV 2060, Руководство пользователя

Страница: 365 / 399

Print
363
Comput
e
r Op
e
ra
tions
11
Print
This section describes how to print with the machine by operating on a computer.
Print Features
The main print features of the machine are as follows:
Printing Using a Print Driver
For more information on print features, click [Help] on the print driver screen to view the print driver's
help. For information on printing, refer to "Printing" (P.365).
Note • Some features become available after you make option settings on the [Configuration] tab.
The unavailable features are grayed out.
„ Pages Per Sheet (N-Up)
Prints multiple pages onto one sheet of paper.
„ 2 Sided Printing
Prints data on both sides of paper.
„ Poster
Splits one page of print data into multiple sheets of paper and enlarges the printed
image to fit the size of each sheet. Used to create large posters, etc.
„ Booklet Creation
Performs 2-sided printing and page allocation for printing a booklet in correct page order.
„ Transparency Separators
Automatically inserts a blank sheet of paper as a separator each time a transparency
is printed.
„ Watermark
Prints preset text, such as "Confidential", over the print data.
„ Secure Print
Temporarily stores the print data on the machine, to print it with the print command from
the machine. This feature allows you to set a passcode, which is helpful to print
confidential documents.
For information, refer to "Secure Print" (P.345).
„ Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information, refer to "Sample Set" (P.347).
„
Delayed Print
Temporarily stores the print data on the machine to print it at specified time.
For information, refer to "Delayed Print" (P.349).
„ Store in Remote Folder
Temporarily stores the print data in a registered folder, to print the data with the print
command from the machine.