Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 426 / 603

15 Maintenance
424
Ma
int
ena
nc
e
15
10
Rotate the release lever clockwise to
lock the unit into position.
11
Close the front cover.
Note • Press firmly in the top center
when closing the cover. If an
error message appears on the
display, press the cover on the
right-hand side to close the
cover completely.
12
Select [Reset Counter] on the screen.
13
Select [Yes] on the screen to reset the counter.
Replacing the Staple Cartridge (For B Finisher)
When the B Finisher (optional) is installed and it is time to replace the staple cartridge,
a message appears on the touch screen. When this message appears, load a new
staple case into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may impair quality and
performance. Use only staple cartridges recommended by Fuji Xerox.
Note • To order a new staple cartridge, contact our Customer Support Center.
1
Make sure that the machine has
stopped, and open the front cover
of the finisher.
2
Grip the lever as shown in the
figure to pull out the staple
cartridge to the right, towards you.