Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 190 / 603

5 Scan
188
Sc
an
5
Book Scanning (Scanning Facing Pages on Separate Sheets)
The [Book Scanning] feature allows you to scan facing pages of a document onto
separate sheets of paper in page order.
This feature is useful if you need to make separate scans for facing pages of bound
originals such as a booklet.
Note • When sending faxes using this feature, place the document on the document glass.
• Non-standard sized documents will not be separated into two accurately.
1
Select [Book Scanning].
2
Select any item.
„ Off
Not scans as a bound document.
„ Left Page then Right
Scans from the left page of facing pages in a document starting from the left page.
„ Right Page then Left
Scans from the right page of facing pages in a document starting from the right page.
„
Top Page then Bottom
Scans from the top page of facing pages in a document starting from the top page.
„ Both Pages
Scans both pages in page order.
„ Left Page Only
Scans the left page only in page order. You can select this item when [Left Page then
Right] or [Right Page then Left] is selected.
„ Right Page Only
Scans the right page only in page order. You can select this item when [Left Page then
Right] or [Right Page then Left] is selected.
„ Top Page Only
Scans the top page only in page order. You can select this item when [Top Page then
Bottom] is selected.
„ Bottom Page Only
Scans the bottom page only in page order. You can select this item when [Top Page
then Bottom] is selected.
„ Binding Erase
Erases the shadow from the center section of the document. You can set the binding
erase width within the range from 0 to 50 mm in 1 mm increments.