Fuji Xerox DOCUCENTRE-II C3000, Руководство пользователя

Страница: 137 / 603

Transmission Options
135
Fa
x
4
„ Remote Mailbox Number
Enter the 3-digit number of the remote mailbox number using the numeric keypad.
„ Password
Enter the 4-digit number of the password for the remote mailbox using the numeric
keypad. If a password has not been set, you do not need to enter one.
„ Next
Select this button after entering [Remote Mailbox Number] or [Password].
Format for Auto Send (DTMF Method)
1
Select [Keyboard] to display the keyboard on the touch screen and enter the following
format.
Format for Manual Send (DTMF Method)
1
Select [Keyboard] to display the keyboard on the touch screen and enter the following
format.
Note • Use the keyboard on the touch screen to enter symbols such as "!" and "
∗
". For information
on the input method, refer to "Entering Text" (P.265).
• Enter the password if necessary.
• You can transmit to any machine that supports our DTMF method feature.
• The above dialing format can be registered in address number to enable private polling
using an address number. For information on how to register address numbers, refer to
"Address Book (Address Number)" (P.336).
F Code (Using F Code Transmission)
F Code is the transmission procedure set by the Communications and Information
Network Association of Japan and is the T.30 (communication protocol) method for
using sub-addresses that was standardized by the ITU-T. The F Code feature enables
various features to be used with transmission among F Code-compatible machines
manufactured by different companies.
When using F Code transmission, use an F Code and password. The F Code, which is
also called a sub-address by other companies, must be registered (entered). Set the
password if necessary.
Note • To use the F Code feature, you need to confirm the F Code of the recipients machine in
advance.
• You can set the F Code and password for each address number. For information on how to
register address numbers, refer to "Address Book (Address Number)" (P.336).
• You can use Relay Broadcast/Remote Relay Broadcast with F Code transmission. For
information on Relay Broadcast, refer to "Relay Broadcast (Transmitting Documents
Through a Relay Station)" (P.144). For information on Remote Relay Broadcast, refer to
"Remote Relay Broadcast (Performing Relay Broadcast to Remote Locations)" (P.148).