Fuji Xerox DocuCentre-II 6000, Руководство пользователя

Страница: 135 / 206

Layout Adjustment
133
Sca
n
4
1
Select [Original Size] on the
[Layout Adjustment] screen.
2
Select a size.
„
Auto Size Detect
Detects the document size automatically.
Note • If the document size cannot be detected automatically, a screen to input the document size
appears.
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "6 System Settings" > "Common Settings" > "Other Settings" > "Paper Size Settings"
in the Administrator Guide.
„
Standard Size
Select a document size from 11 pre-configured types.
„
Variable Size
Enter the desired scan size when scanning non-standard size documents or when
making copies at a size different from that of the currently loaded document. Set the
size in the document glass X (horizontal) direction within the range of 15 to 432 mm
and in the Y (vertical) direction within the range of 15 to 297 mm, in 1 mm increments.
The scale on the outside of the document glass is a useful reference for specifying the
document size.
Mixed Sized Originals (Scanning Different Size Documents
Simultaneously)
When using the document feeder, you can simultaneously scan different size
documents with the respective sizes. You can also specify a size to scan different size
documents with the same size.
Important • Always load the A5-size documents in portrait orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or
A4 documents loaded in portrait orientation, load B5 documents in portrait orientation.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle may not be copied properly.
Note • When [Reduce/Enlarge] is set to [Auto %] and the output size is specified for [Output Size],
the scanned data is automatically reduced/enlarged to the specified size. However, since
the scanned image is not rotated, the image will be reduced/enlarged to fit the specified size
while keeping its orientation. For example, when an A3 landscape original is loaded and the
output size is set to A4 portrait, the scanned image is reduced to A5 landscape and printed
on A4 portrait paper.
• If the document size cannot be detected automatically, a screen to input the document size
appears.
Document feeder Document glass
Document size
B5, B5 , B4, A5 , A4, A4 , A3,
8.5 x 11 inches, 8.5 x 11 inches ,
8.5 x 14 inches, 11 x 17 inches
B6, B6 , B5, B5 , B4, A6, A5,
A5 , A4, A4 , A3, 8.5 x 11
inches