11 Using Scan Service
102
U
sin
g
Sca
n
Ser
vice
11
Configuration of Scan to FTP/SMB
Preparations
Prepare the following to use Scan to FTP/SMB.
■
Using with FTP
When using with FTP transmission, one of the following FTP servers and an account
to FTP servers (login name and password) are required.
z
Microsoft Windows Server 2003
The FTP service of Microsoft Internet Information Server 6.0
z
Microsoft Windows NT Server 4.0, Microsoft Windows 2000 Server,
Microsoft Windows NT Workstation 4.0, Microsoft Windows 2000 Professional,
Microsoft Windows XP. Microsoft Windows XP Professional x64 Edition,
Microsoft Windows Vista, or Microsoft Windows Vista x64 Edition
The FTP service of Microsoft Internet Information Server 3.0 or later
z
Mac OS X
The FTP service of Mac OS X v10.1.5/v10.2.x/v10.3.5/v10.3.6/v10.3.8/v10.3.9/
v10.4.2
z
Novell NetWare
FTP service of NetWare 5.11J or 5.12J.
Refer to the manual provided with the software for how to configure the FTP service.
■
Using with SMB
When using with SMB transmission, a computer running on the following OS which
includes a shared folder function is required.
z
Microsoft Windows 98
z
Microsoft Windows Me
z
Microsoft Windows NT 4.0
z
Microsoft Windows 2000
z
Microsoft Windows Server 2003*
z
Microsoft Windows Server 2003 x64 Edition
*The active directry should not be installed.
z
Microsoft Windows XP
z
Microsoft Windows XP Professional x64 Edition
z
Microsoft Windows Vista
z
Microsoft Windows Vista x64 Edition
Note
•
DocuCentre 9000 does not support Windows 98, Me, and NT 4.0.
Installation Overview
This section describes the configuration procedure to use Scan to FTP/SMB as follows.
z
Enabling port and setting TCP/IP
Enable the FTP client port or SMP port, and set an IP address.