Fuji Xerox DocuCentre 1055, Руководство пользователя

Страница: 67 / 245

Specifying Destinations
67
Stop the Fax Job
Follow the step 1 to manually cancel a fax job while scanning the document. After
scanning the document, follow the step 2 to 3.
NOTE: When the document is sent by Direct Send, there may be some delay between
the cancel instruction and the actual end of transmission.
1.
Press the <Stop> button on the control
panel to cancel the current fax job.
2.
If required, press the <Job Status>
button on the control panel to display
the Job Status screen. To exit the Job
Status screen, press the <Job Status>
button.
3.
If the job to be canceled is displayed on
the current screen, select [Stop
(Delete)] using the <Select> button.
If not, go to step 4.
4.
Press the < > button to display the All Jobs screen.
5.
Select [Fax/E-mail] using the <Select> button.
6.
Select [Send] using the <Select> button.
7.
Select the job to be canceled by selecting [ ] or [ ] using the <Select> button.
8.
Select [Details] using the <Select> button.
9.
Select [Stop (Delete)] using the <Select> button.
Specifying Destinations
This section describes how to specify destinations using the features available on the
machine. For more information, refer to the following.
Address Enter/Next – page 68
Address Book – page 68
Speed Dial – page 69
One Touch Dial – page 70
Relay Broadcast – page 70
<Stop> button
<Job Status> button