Fuji Xerox DocuCentre 1055, Руководство пользователя

Страница: 160 / 245

9 Setups
160
NOTE: When changing the setting of [Ext./Outside Line], you may need to re-register
fax numbers in the Address Book.
NOTE: If the figure set under [Ext./Outside Line] is entered as the first digit of the
destination fax number, a pause will automatically be inserted. No pause will be
inserted if the number appears as the second or later digit. If a pause has already
been entered in the pause insertion position, no pause will be entered automatically.
Direct Send
Using the document feeder, this feature allows you to start sending a fax immediately
after scanning the first page of documents. This is a useful feature when there is
inadequate available memory on the machine. When you use the feature, the <Direct
Send> green light illuminates.
Specify On or Off as the default value of this feature.
Fax Receiving Mode
Specify whether the machine should start receiving a fax with or without your
intervention.
Auto Receive
Automatically starts receiving a fax after the specified the number of rings on the
Access Attempt screen. After selecting [Auto Receive] using the <Select> button,
pressing the <Enter> button allows you to specified the number of rings on the Access
Attempt screen within the range of 1 to 20. Use the alphanumeric keypad on the control
panel.
Manual Receive
Receives a fax manually. When you have communicated with a caller and confirm that
the call is a fax job, press the <Manual Dial> button to receive a fax. Refer to
On-Hook
in the Fax chapter on page 84.