Fuji Xerox DocuCentre 1055, Руководство пользователя

Страница: 159 / 245

Fax Settings
159
Transfer Document
Specify how a received fax is to be processed by the machine.
• Transfer – Forwards a received fax to a specified destination. You can select the
destination fax number from the Address Book. When [Enter Speed Dial] is
selected, you can specify the fax number using the One Touch Dial button, or Speed
Dial code. To complete specifying the fax number, press the <Enter> button.
• Transfer & Print – Forwards a received fax to a specified destination and prints it out
simultaneously. You can select the destination fax number from the Address Book.
When [Enter Speed Dial] is selected, you can specify the fax number using the One
Touch Dial button, or Speed Dial code.
• Print – Prints out a received fax immediately.
F Code
Enter an F Code (up to 20 digits using 0 to 9, *, and #) using the alphanumeric keypad
on the control panel.
Check Password
Specify whether or not to have password control.
Password
Set a password (up to 20 digits using 0 to 9, *, and #) using the alphanumeric keypad
on the control panel.
Delete
Delete the registered F Code.
Local Terminal Information
Use this feature to configure the settings for the line connected to the machine.
Line Type
Select the line type from 10pps, 20pps, and Tone.
Fax No.
Enter the fax number of the machine, using the alphanumeric keypad on the control
panel. Press the <C> button to clear the previous value.
Ext./Outside Line
Select the extension or outside line. If you selected [Extension], then enter the number
(0 to 9) to connect with the outside line, using the alphanumeric keypad on the control
panel. Press the <C> button to clear the previous value.