Fuji Xerox DocuCentre 1055, Руководство пользователя

Страница: 136 / 245

9 Setups
136
Auto Repeat
Use this feature to set the machine to automatically repeat button presses after
continuing to press the button for a specified period of time. This reduces the number
of times you will need to press the button. When [On] is selected, specify [Repeat Start]
or [Repeat Interval].
Repeat Start – Specify the period of time when the button is continued to press to start
this feature.
Repeat Interval – Specify the interval to change the setting values.
Offset Stacking
Use this feature to specify whether or not the machine should offset the output.
Auditron Administration
The Auditron feature is used to prevent the machine from being used by unauthorized
users and also to track the total number of copies produced with each account. When
the total number reaches the upper limit set up by System Administrator, users cannot
use the copy feature on the machine. When the Auditron features is enabled, users
need to enter password to display the [System Settings] screen, or use the copy, fax,
and e-mail features on the machine.
NOTE: To enable the Auditron feature for the printer, you need to change the setting
of [Auditron (Print)] using CentreWare Internet Services. For how to change the
setting, refer to
Auditron (Print) in the CentreWare Internet Services chapter on
page 111.
NOTE: Copying is not possible beyond the set maximum number of pages. However,
if the page limit is reached while printing one side of a double-sided copy, the
message will be displayed but copying will continue until both sides of the copy have
been completed. In that case, the number of copies will exceed the maximum by one.
1.
Select [Auditron Admin.] on the [System
Settings] screen using the <Select>
button.
2.
Press the <Enter> button.
3.
Select the required option using the <Select> buttons.
4.
Press the <Enter> button.