Fuji Xerox ApeosPort-V C5580, Руководство администратора, Страница: 225 / 797

Connectivity & Network Setup
225
To
ols
5

Device Certificate - Client
Select a certificate for HTTP SSL/TLS communications.

Verify Remote Server Certificate
When the machine is operated as an SSL client, select whether or not to verify the certificate
of the remote server.
S/MIME Settings (ApeosPort Series Models Only)
Configure the S/MIME settings to use encryption or signature option on the transmission of
e-mail or fax.

Device Certificate - S/MIME
Select a certificate for S/MIME communications.
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.389).

S/MIME Communication
Select whether or not to enable S/MIME communications.

Receive Untrusted E-mail
If you select [No], the machine cannot receive the following e-mail:
 E-mails other than e-mail sent by S/MIME when [S/MIME Communication] is set to
[Enabled].

E-mails that fail to attach a signature or verification.
 E-mails that are attached with an expired certificate.

Receive Untrusted Internet Fax
If you select [No], the machine cannot receive the following Internet fax:

Internet faxes other than the Internet fax sent by S/MIME when [S/MIME
Communication] is set to [Enabled].
 Internet faxes that fail to attach a signature or verification.
 Internet faxes that are attached with an expired certificate.

Message Digest Algorithm
Select a message digest algorithm. Select from [SHA-1], [MD5], and [SHA-256].

Message Encryption Method
Set the encryption method for mail contents. Select from [3DES], [RC2-40], [RC2-64], [RC2-
128], [AES-128], [AES-192], and [AES-256].

Split Encrypted E-mail
Select whether or not to split an outgoing encrypted e-mail for each recipient.

Split Encrypted Internet Fax
Select whether or not to split an outgoing encrypted Internet fax for each recipient.

Digital Signature - Outgoing E-mail
Select whether or not to always add a digital signature to outgoing e-mails. You can also
select the setting in which the machine asks to add a digital signature to the e-mail
whenever you send.