Fuji Xerox ApeosPort-V C5580, Руководство администратора

Страница: 215 / 797

Connectivity & Network Setup
215
To
ols
5

Primary Server Type
Select the type of primary server from [Standard] or [Cisco].

Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.

Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.

Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.

Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.

Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
SIP Registrar Server Setup
Configure SIP registrar server settings. You can set a primary server and a secondary server.
Note • You can use up to two SIP registrar servers.
• Select [Cisco] for a server type.

Primary Server - IP Address
Enter the IP address of the primary server. Up to 255 characters are allowed. You can specify
the addresses by IPv4 address, IPv6 address, and FQDN.

Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 5060.

Primary Server - Login User Name
Enter the login user name of the primary server. Up to 31 characters are allowed.

Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.

Primary Server Type
Select the type of primary server from [Standard] or [Cisco].

Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.

Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.