Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 99

Страница: 99 / 783

Replacing Consumables

int

na
nc
e

Replacing Stamp (for Duplex Automatic Document Feeder B1-PC)

If the machine offers the Fax service and the Stamp Kit SP (optional) is installed, replace the
stamp cartridge when stamp impressions start to fade.

Important •

Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.

•

Problems caused by using consumables not recommended by Fuji Xerox are not covered by the
maintenance service contract.

•

Before using consumables, carefully read instructions and precautions on their packages.

Note

•

We recommend always keeping spare consumables/periodic replacement parts in stock.

•

To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)

Lift the document feeder gently, and open the
Side 2 scanner.

Stick the supplied pin into the old stamp
cartridge, and pull it straight out of the
machine.

Note

•

If only the sponge part of the stamp
cartridge is removed, make sure of removing
the bottom part of the cartridge.

Insert the new stamp cartridge.

Close the Side 2 scanner, and then close the
document feeder gently.

Содержание ApeosPort-V C2276
















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V C2276

Отзывы:

Fuji Xerox ApeosPort-V C2276, Руководство администратора, Страница: 99 / 783

Результаты поиска

Содержание ApeosPort-V C2276

Отзывы: