manualshive.com logo in svg

Fuji Xerox ApeosPort-V C2276, Руководство администратора, Страница: 747 / 783

Поделиться
Скачать
Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 747

Notes and Restrictions

747

A

ppe

n

d

ix

16

Cisco Call Manager Express that works on routers such as CISCO2801 by Cisco Systems, 
Inc. is not supported

If you use a SIP server manufactured by Cisco Systems, Inc., you can specify only IPv4 
address character strings of the SIP server on the right side of @ in [SIP User ID (Sign-in 
Name)]. If you specify IPv6 address character strings, FQDN character strings, and SIP 
domain name character strings, the SIP server does not work.

When a SIP server is configured as a SIP terminal of the machine on the server, if settings 
other than specified are configured, the SIP server does not work as the SIP terminal.

For a SIP server manufactured by Cisco Systems, Inc., an address retention period is fixed 
to 120 seconds. This value cannot be changed even if Timer Register Expires value is 
changed.

VoIP Gateway

Cisco ISR 2800 series (with IOS 12.4) is validated as a VoIP gateway available for the 
machine.

The gateway may not work properly over an analog line depending on your environment.

If you use a VoIP gateway manufactured by Cisco Systems, Inc., only UDP can be used as 
T.38 protocol.

VoIP gateways do not work on IPsec communication.

VoIP gateways do not work in an IPv6 environment.

If settings other than specified by Fuji Xerox are configured for a dial peer or a voice port 
on a VoIP gateway, the VoIP gateway does not work.

If a part of transferred data is lost on a network, a part of image may be missing or be 
getting stacked. To avoid these, the ECM mode is effective. The machine can always use 
the ECM mode, however, you cannot use the mode depending on the VoIP gateway 
settings. Consult your network administrator whether the ECM mode is available.

NAT/NAPT

Communication protocols that transmit UPnP, TURN, STUN, ICE, and UDP hole punching 
in SIP communications are not supported. IP Fax (SIP) does not work in an environment 
that uses NAT/NAPT devices including ALG.

Notes and Restrictions when Connecting with Internet Service Provider

This section describes notes and restrictions to observe when using features that transmit e-
mails or Internet faxes using an Internet service provider (ISP).

The features related to e-mail are as follows:

E-mail

E-mail Notification Service

Print E-mail

Internet Fax

Notes and Restrictions on Accessing ISP

Observe the following notes and restrictions when connecting the machine to ISP:

Dial-up connection is not supported. Continuous connection is required.

Connect the machine in an environment using IP masquerade. Assigning a global IP 
address to the machine is not supported.

Содержание ApeosPort-V C2276
















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов