Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 708 | Manualshive

Страница: 708 / 783

Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 708

16 Appendix

708

A

ppe

n

d

ix

16

Font Caching

To ensure hi-speed printing, outline fonts of up to a certain size are cached. Outline fonts are
converted into bitmap data temporarily and then printed. To minimize this processing time,
the processed bitmap data is saved in the memory. This process is called font caching.

The saved bitmap data is deleted when you turn the machine off or reset it. For the PCL
emulation mode, data other than that being processed is not saved.

Output Feature

This section describes the machine's output features. The following two output features are
available:



Outputting a Pending Print Job



Forcible Output in Emulation Mode

Outputting a Pending Print Job

The printing of jobs already received by the machine can be prioritized over other jobs.

For information on prioritizing the printing of jobs already received by the machine, refer to "11 Job Status" > "Printing
Pending Jobs" in the User Guide.

Forcible Output in Emulation Mode

In emulation mode, data is not output until a complete page of data or a page-break
command is received. For a Parallel interface or a USB interface, if printing ends in the
middle of a page, the next data set waits until the time set with [Auto Eject Time] elapses.

In this case, the Forcible Printing feature does not wait for the auto eject time; however,
forcibly prints the data within the machine.

For more information on forcible printing, refer to "11 Job Status" in the User Guide.

For more information on the auto eject time, refer to "Auto Eject Time" (P.214).

Factory Default Settings

In HP-GL or HP-GL/2 emulation mode factory default setting, the document is reduced or
enlarged to print according to the paper size (Auto Layout).



Document: Auto, Coordinate Origin: 0 degrees, Scaling Mode: Paper Size, Scaling: On

Note

•

Change the factory default setting if required. For more information on changing procedures, refer
to "HP-GL/2 Emulation" (P.707).

Print Area

Document Size

Paper Size

«
...
706
707
708
709
710
...
»

Содержание ApeosPort-V C2276
















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов