Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 38

Страница: 38 / 783

1 Before Using the Machine

Bef

ore
Us
ing
the

ine

Touch Screen

On the touch screen of the machine, you can switch pages and scroll a list by the following
operations.

Note

•

The touch screen of the control panel used in the machine is pressure-sensitive. Adjust the power to
touch the screen.

•

You can set whether to enable flick and double-tap or not. For more information, refer to "Screen/
Button Settings" (P.162).



Drag

Slide your finger to the position desired with your finger touched the touch screen.

Drag the touch screen from side to side to switch
pages.

Drag the touch screen up and down to scroll a list.

Note

•

During drag, scrolling stops when you move your
finger away from the touch screen.



Flick

Slide your finger quickly to the position desired and release it.

Flick the touch screen from side to side or up and
down to switch pages.

Flick the touch screen up and down to scroll a list

Note

•

During flick, scrolling continues for a while even
after you move your finger away from the touch
screen.



Tap

Touch the touch screen and move your finger away from the screen quickly. To tap the same
position of the screen twice is called double-tap.

Tap the touch screen to switch the thumbnail bar to be displayed or not.

Содержание ApeosPort-V C2276
















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V C2276

Отзывы:

Fuji Xerox ApeosPort-V C2276, Руководство администратора, Страница: 38 / 783

Результаты поиска

Содержание ApeosPort-V C2276

Отзывы: