manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Продукт Fuji Xerox ApeosPort-V 4070 предоставляет администраторам и пользователям возможность легкого управления задачами печати и сканирования. Скачайте бесплатно Руководство администратора с нашего веб-сайта, чтобы максимально использовать функционал этого устройства. manualshive.com - ваш источник качественных руководств и инструкций.

Поделиться
Скачать
background image

Paper Jams

551

Problem

 Solvin

g

15

Paper Jams

When a paper jam occurred, the machine stops and an alarm beeps. A message is also 
displayed on the touch screen. Follow the instructions displayed to remove the jammed 
paper.

Gently remove the paper to avoid it to be torn. If the paper is torn, remove all the torn pieces, 
making sure that none remain inside the machine.

If a paper jam message appears again after you have cleared the paper jam, another paper 
jam may be occurred in some other parts of the machine. Clear this by following the 
message.

When the paper jam is cleared, printing is automatically resumed from the point when the 
paper jam occurred.
If you were during copying, press the <Start> button to resume the copying from the point 
when the paper jam occurred.

This section describes how to clear a paper jam occurring in the following locations.

The following shows the reference section for the procedures to clear a paper jam in each 
location.

Paper Jams in Cover A.................................................................................................................................................................552

Paper Jams in Cover B.................................................................................................................................................................554

Paper Jams in Cover C.................................................................................................................................................................555

Paper Jams in Cover D (Duplex Module) ................................................................................................................................555

Paper Jams in Cover E .................................................................................................................................................................556

Paper Jams in Trays 1 and 2 / Trays 3 and 4 of Two Tray Module (Optional) ..............................................................557

Paper Jams in Tray 3 (When Tandem Tray Module (Optional) is Installed) .................................................................558

Paper Jams in Tray 4 (When Tandem Tray Module (Optional) is Installed) .................................................................558

Paper Jams in Tray 5 (Bypass) ..................................................................................................................................................559

Paper Jams in Tray 6 (HCF B1) (Optional) .............................................................................................................................560

Paper Jams in Finisher-B1 (Optional)......................................................................................................................................561

Paper Jams in C3 Finisher / C3 Finisher with Booklet Maker (Optional).........................................................................563

Paper Jams in the Folder Unit CD1 (Optional)......................................................................................................................569

Important •

When a paper jam occurred, if you pull out a paper tray without checking the paper jam location, the 
jammed paper may be torn and the pieces may remain inside the machine. This may cause machine 
malfunctions; therefore, always check where the paper jam occurred first.

•

If any piece of jammed paper remains inside the machine, the paper jam message will not 
disappear from the touch screen.

•

Clear the paper jams while the machine is powered on. If you turn off the machine, all data stored 
on the memory of the machine will be erased.

•

Do not touch components inside the machine. This may cause print defects.

WARNING

If you need to pull out a tray to remove paper jam, contact your local Fuji Xerox 
representative. Do not pull out a tray, otherwise it may cause injuries.

CAUTION

Do not attempt to remove a paper deeply jammed inside the product, particularly 
a paper wrapped around the fusing unit or the heat roller. Otherwise, it may cause 
injuries or burns. Switch off the product immediately and contact Fuji Xerox 
representative.

Содержание ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ApeosPort-V 4070

Oki C910 Service Manual preview
C910
Бренд: Oki Страницы: 282
Oki B411d Guía Del Usuario preview
B411d
Бренд: Oki Страницы: 154
Oki ML320 Turbo Manual Do Utilizador preview
ML320 Turbo
Бренд: Oki Страницы: 121
Oki B4100 Guía Del Usuario preview
B4100
Бренд: Oki Страницы: 96
Xante Accel-a-Writer 8300 Maintenance And Specifications preview
Accel-a-Writer 8300
Бренд: Xante Страницы: 12
Xerox 3635MFP - Phaser B/W Laser Evaluator Manual preview
3635MFP - Phaser B/W Laser
Бренд: Xerox Страницы: 16
Lexmark 634dte - X B/W Laser Administrator'S Manual preview
634dte - X B/W Laser
Бренд: Lexmark Страницы: 148
Citizen Swift 120D User Manual preview
Swift 120D
Бренд: Citizen Страницы: 44
Oki LP-2050-MF User Manual preview
LP-2050-MF
Бренд: Oki Страницы: 246
Canon imageCLASS LBP913w User Manual preview
imageCLASS LBP913w
Бренд: Canon Страницы: 327
Roland ColorCAMM Pro User Maintenance Manual preview
ColorCAMM Pro
Бренд: Roland Страницы: 6
WOOSIM Porti-M100V Operator'S Manual preview
Porti-M100V
Бренд: WOOSIM Страницы: 27
FARGO electronics DTC500 Series Specifications preview
DTC500 Series
Бренд: FARGO electronics Страницы: 4
Fargo Pro-ID Brochure & Specs preview
Pro-ID
Бренд: Fargo Страницы: 4
SATO FX3-LX Driver Manual preview
FX3-LX
Бренд: SATO Страницы: 100
Sharp AR-5420 Operation Manual preview
AR-5420
Бренд: Sharp Страницы: 44
Olivetti LINEA Office User Manual preview
LINEA Office
Бренд: Olivetti Страницы: 61
Olivetti d-COPIA 3013MF Operation Manual preview
d-COPIA 3013MF
Бренд: Olivetti Страницы: 483

Бренды по названию

Популярные бренды

Загрузить еще бренды