Fuji Xerox ApeosPort-V 4070 Скачать руководство пользователя страница 107

Страница: 107 / 719

Billing Information

107

ine
S

User Account Billing Information

You can check the number of pages printed by user.

When the Auditron mode is enabled, you can check the billing meters for the currently
authenticated user ID.

Note

•

[User Account Billing Information] is displayed when the [Accounting Type] is set to [Local
Accounting].

For more information on the Auditron mode, refer to "Accounting" (P.273).

Press the <Log In/Out> button.

To check the billing meter of a currently authenticated user ID

1) Enter the user ID with the numeric keypad

or the keyboard displayed on the screen,
and select [Enter].

When a password is required, select [Next]
and enter the user's passcode, and select
[Enter].

2) Press the <Machine Status> button.

To check the system administrator meter

1) Enter the system administrator's user ID with the numeric keypad or the keyboard

displayed on the screen, and select [Enter].

When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].

Note

•

The default user ID is "11111".

•

The default passcode is "x-admin".

2) Press the <Machine Status> button.

Select the [Billing Information] tab.

Select [User Account Billing Information].

Select a meter to check.

Note

•

The meters are displayed only for the
features set to [Enable Accounting] in the
Auditron mode.

Meter (Copy Jobs)

Displays the number of pages copied.

Meter (Scan Jobs)

Displays the number of pages scanned.

Meter (Print Jobs)

Displays the number of pages printed.

Note

•

[Meter (Print Jobs)] is not displayed for the system administrator.

Содержание ApeosPort-V 4070















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды