background image

3 Copy

100

Co
py

3

z

Sideways Images
Select this option when placing the top edge of the document against the left side of 
the document glass or document feeder.

Edge Erase (Erasing Edges and Margin Shadows of the Document)

When you copy a document with the document cover open or when you copy a book, 

the edges and center margin of the document may be printed as black shadows. The 

Edge Erase feature allows you to erase such shadows.

Note

For 2-sided originals, the same edge erase amounts are set for the front and back sides.

If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in 
proportion to the ratio you specified.

The binding shift specified in [Booklet Creation] will not affect the edge erase amounts.

If original is placed on the document glass and [1 g 2 Sided] is selected when using 2 Sided 
Copying feature, symmetrical edge erase amounts on both sides are not applied to output 
even if [Individual Edges] is specified and [Mirror Side 1] is selected as [2 Sided Original - 
Side 2] option. To apply symmetrical edge erase amounts on both sides, select [2 g 2 Sided] 
for 2 Sided Copying operation.

Even when the edge erase amount is set to 0 mm, full page copying cannot be made. For information on 
the areas that can actually be printed, refer to "15 Appendix" > "Printable Area" in the Administrator 
Guide.

1

Select [Edge Erase]. 

2

Select any option. 

„

Normal

The edge width to erase is set to 2 mm for the top and bottom, and left and right edges.

„

All Edges

Erases the shadows of the four edges of a document, as well as the shadow in the 

center of the document if it is a bound document or a booklet. You can specify values 

for [All Edges] and [Center] individually.

„

Individual Edges

Erases the shadows of the top, bottom, left, and right edges of a document, as well as 

the shadow in the center of the document if it is a bound document or a booklet. You 

can specify values for [Top], [Bottom], [Left], [Right], and [Center] individually.

„

Parallel Edges

Erases the shadows of the top and bottom edges, and left and right edges of a 

document, as well as the shadow in the center of the document if it is a bound 

Содержание ApeosPort-IV C4430










































































































































































































































































































































































































Отзывы: