Fuji Xerox apeosport-iv C3370, Руководство администратора

Страница: 236 / 889

Tools
236
T
ools
5
„
Port Number
Enter a port number to use IP fax (SIP).
The default value is 5060.
Important
z
Do not use any numbers assigned to other ports.
Note
z IP fax (SIP) is not available for some models.
Receive E-mail
„
Port Status
Select [Enabled] when you receive e-mails or Internet faxes.
Send E-mail
„
Port Status
Select [Enabled] when you send e-mails or Internet faxes.
E-mail Notification Service
„
Port Status
Select [Enabled] when you use the E-mail Notification Service. The E-mail Notification
Service notifies you of the machine status or the completion of a print job and a direct fax
job by e-mail.
Note
z
[Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray Status], [Jam Status], [Interlock
Status], and [Fault Notice] are notified as the machine status.
z
You can configure the E-mail Notification Service in CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
Important
z To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the Internet. The communication fee shall be borne by you.
UPnP Discovery
„
Port Status
Select [Enabled] to use UPnP.
„
Port Number
Enter a port number for UPnP communication from 1 to 65535.
The default value is 80.
Important
z Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)).
WSD
Note
z
WSD stands for Web Services on Devices.