Fuji Xerox apeosport-iv C3370, Руководство администратора

Страница: 198 / 889

Tools
198
T
ools
5
[Resolution] under [Image Log Generation], the machine creates an image with the same resolution of the
input image.
z
For jobs of fax transmissions, the machine always operates as [Low] is set to [Assurance Level] regardless of
the settings of the machine.
z Up to 8191 pages of images can be created. If more than 8191 pages of images are input into the machine,
even if [All Pages] is selected for [Page Range] under [Image Log Generation], not more than 8191 pages can
be created.
z If the machine runs out of hard disk space for storing images, the machine operates in accordance with the
setting of [Image Log Generation] > [Assurance Level] as follows.
z
[High]: A job is cancelled.
z
[Low]: A job is executed. However, the warning will be displayed at the end of the job and notifies the user
that the image creation failed.
z When an error occurs during generating an image log, the machine operates in accordance with the setting
of [Image Log Generation] > [Assurance Level] as follows.
z
[High]: Replaces the image to an error image (1x1 pixels) and indicates a system error. In this case, turn off
the machine and confirm that the control panel is lit off, and then turn on the machine again.
z [Low]: Replaces the image to an error image (1x1 pixels) and records the error information after finishing
the job.
z
Up to 2000 image logs can be stored in the machine.
z
The text size of image logs differs depending on the setting of [Resolution] under [Image Log Generation].
Refer to the following table when you set the resolution.
Note
z This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
z
If you set [Service Rep. Restricted Operation] to [On], our service representatives cannot change the [Image
Log Control] settings. For more information on Service Rep. Restricted Operation, refer to "Service Rep.
Restricted Operation" (P.219).
Image Log Control
Set whether or not to use the Image Log Control feature.
Image Log Target
Set whether or not to create image logs per job type such as copy, print, scan, and fax.
Image Log Generation
Set the image data to manage as an image log. One image log file (PDF format) is created
per one job.
Resolution Size for Color
Jobs
Size for B&W
Jobs
Remarks
200 dpi 6 pt 6 pt Adequate level for normal
document
100 dpi 10 pt 14 pt Large size characters are legible.
72 dpi (default) 12 pt 18 pt Title size characters are legible.
50 dpi 16 pt 24 pt Characters are illegible. Suitable
for Preview
25 dpi 24 pt 32 pt Characters are illegible. Suitable
for Thumbnail view