Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 677 / 705

Notes and Restrictions
677
Ap
pe
ndix
16
Notes and Restrictions on Job Flows
„ Job Flows (ApeosPort Series Models Only)
z
If you transfer fax or Internet fax documents via SMB, FTP, or E-mail, the documents
will be converted into the standard size (such as A4 and A3) and printed.
z
If a Job Flow is performed with the following settings, an interference pattern may be
created:
- Original Type: [Photo & Text] or [Photo]
- Resolution: [400 dpi] or [600 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-S]
z
If an interference pattern is created, change the settings as follows:
- Resolution: [200 dpi] or [300 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-F] or [TIFF-J]
„ Web Application feature (ApeosPort Series Models Only)
z
The following conditions and restrictions are applied when you print files stored in a
remote server.
- [Output Destination] can be specified, but the staple and hole punch cannot be
specified.
- The [Pages per Side] feature can be specified only when you print PDF files.
- When [Port Settings] is set to [NetWare] or [SMB], set the transport protocol to
[TCP/IP].
- HTTP or HTTPS can be used for the communications between the machine and
a remote server.
- Printable file formats are [TIFF], [PDF], and [XPS].
- Print data is spooled to the hard disk of the machine, and then printed as a job.
Therefore, the print data is recognized as a job while the data is being spooled to
the hard disk.
- The Secure Print feature cannot be used.
- Printing is available even when [Auto Print] is set to [On] under [Machine Clock /
Timers].
- "Web Applications - Print" is displayed on the [Job Status] screen.
- The <Online> indicator is unlit while the print data is being spooled to the hard disk.
„ Job Flow Settings for High Compression Format
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
- File Format (with thumbnail specification): [DocuWorks] or [XPS]
Important • If settings other than the above are used, you can register a Job Flow sheet on the machine,
but an error occurs when the machine executes the Job Flow and the Job Flow cannot be
carried out.
„ Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating
a job flow on the machine, any subsequent change of the number or address on the
Address Book is not reflected on the job flow created. To transmit to the changed
address, you must directly correct the address registered on the job flow.