Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 55 / 705

Changing the Paper Settings
55
P
ape
r a
nd O
the
r M
edia
2
Changing the Paper Settings
This section describes how to change the paper type for the Trays.
After loading paper in a tray, specify the type of paper loaded.
Note • Users can name Custom 1 to Custom 5 displayed in the paper type settings. For information
on how to set names to Custom 1 to Custom 5, refer to "Custom Paper Name/Color"
(P.129).
• You can change the paper type setting without entering to the System Administration mode
on the [Setup] screen, which is displayed by selecting [Setup] in the [Services Home] screen
if you configure the settings in advance. For more information, refer to "Customize Paper
Supply Screen" (P.130).
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator's
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the [Services Home]
screen.
Note • When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select [System Settings] > [Common
Service Settings] > [Paper Tray Settings].
1 2 3
4
5 6
7 8 9
0 #
C
<Log In/Out> button