Fuji Xerox ApeosPort-II C5400, Руководство пользователя

Страница: 140 / 256

4 Scan
138
S
can
4
Scan to PC
You can convert scanned data to TIFF, DocuWorks, or PDF format, and then use the
FTP or SMB protocol to send the data to a computer on the network. The following
shows the reference section for each feature.
Note • Before scanning, a shared folder must be created on the computer for saving scanned data.
If the FTP protocol is used, the FTP service must be set. For information on the computer
settings, refer to the documentation supplied with your operating system. For information on
compatible operating systems, refer to "15 Appendix" > "Specifications" > "Scan Feature
Specifications" in the Administrator Guide.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Transfer Protocol.......................................................................................................................139
Address Book ............................................................................................................................139
Browse... ...................................................................................................................................140
Specifying a Destination ...........................................................................................................140
1
Select [Scan to PC] from the [All
Services] screen.
2
Specify a forwarding destination on
the [Scan to PC] screen.
Note • Fields displayed vary
depending on the protocol.
Scanning Color
You can set the color mode to scan a document.
For information about the feature, refer to "Scanning Color (Selecting a Color Mode)" (P.142).
2 Sided Originals
You can automatically scan both sides of a 2-sided document.
By setting the binding style, both sides are scanned in the same orientation.
For information about the feature, refer to "2 Sided Originals (Scanning Both Sides of a Document)"
(P.143).
Original Type
You can select the type of the document.
For information about the feature, refer to "Original Type (Selecting the Document Type)" (P.144).
File Format
You can select a file format for output data.
For information about the feature, refer to "File Format (Selecting a File Format for Output Data)"
(P.145).