Fuji Xerox ApeosPort-II C3300 Скачать руководство пользователя страница 464

Страница: 464 / 635

15 Problem Solving

462

Problem Solving

Unable to Send E-mail

Follow the procedure below if you cannot send a scanned document using the e-mail

feature.

The Image is not What was Expected

Follow the procedure below if the image is not what was expected.

Action Correctly specify the shared name.

Cause When using SMB (UNC Format), the save destination is not

correctly specified.

Action Correctly specify the save destination.

Cause The login name is not entered correctly.

Action Correctly enter the login name.

Cause The password is not correctly entered.

Action Correctly enter the password.

A Transmission Report -
Undelivered is output.

Cause Unable to transmit due to the error.

Action Check the [Transmission Results] in the Transmission Report -

Undelivered. If the error code is listed, refer to "Error Code"
(P.465).

Unable to send e-mail.

Cause The mail address is incorrect.

Action Enter the correct mail address.

Cause The data size exceeded the maximum e-mail size.

Action Change the maximum e-mail size, or lower the resolution.

Refer to "Maximum E-mail Size" (P.323), or "Scan Resolution
(Specifying a Scanning Resolution)" (P.194).

The image is dirty.

Cause The document glass or the document cover is dirty.

Action Clean the document glass or the document cover.

Refer to "Cleaning the Document Cover and Document Glass"
(P.427).

Cause The document is a transparent type such as a transparency

film.

Action If the document is transparent, dirt on the document cover will

appear on the image. Place a white sheet of paper on the
document when scanning.

Cause The document is colored, rough or a blueprint.

Action Adjust the copy density or image quality when scanning.

Cause Glossy printing paper is scanned.

Содержание ApeosPort-II C3300




























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-II C3300

Отзывы:

Похожие инструкции для ApeosPort-II C3300

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-II C3300, Руководство пользователя

Результаты поиска

Содержание ApeosPort-II C3300

Отзывы:

Похожие инструкции для ApeosPort-II C3300

Бренды по названию

Популярные бренды