Fuji Xerox ApeosPort-II C3300, Руководство пользователя

Страница: 341 / 635

Setup Menu
339
System Settings
10
4
When [Billing] is selected, using the keyboard displayed on the screen or the numeric
keypad on the control panel, enter the time for one unit charge (0.1 to 255.9 seconds
in 0.1 second increments).
5
Select [Save].
6
Exit the System Administration mode.
iFax Profile
Set the format of the iFax profile.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between iFax-compatible machines.
„ TIFF-S
This profile is the iFax standard. For documents that are larger than A4, the size is reduced
automatically to A4 for transmission.
„ TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
„
TIFF-J
Select this profile for sending documents in JBIG.
Last Name
Enter a recipient's last name (up to 32 characters).
For information about how to enter characters, refer to Entering Text (P.271).
First Name
Enter a recipient's first name (up to 32 characters).
For information about how to enter characters, refer to Entering Text (P.271).
Transfer Protocol
Set the forwarding destination protocol. You can select from [FTP] and [SMB].
Server Name/IP address
Enter a name or IP address of a forwarding destination server.
Shared Name (SMB Only)
Enter the shared name set for the SMB folder.
Important • If the “/” mark is used at the top of a shared name, a job flow cannot read the shared name
correctly. Do not use the “/” mark at the top of a shared name.
Save In
Enter the directory for storing documents. When SMB is selected, use a UNC format.
z
Forwarding via FTP
Example: To save in the bbb directory under the aaa directory in the root directory.
aaa/bbb
z
Forwarding via SMB
Example: To save in the bbb directory under the aaa directory in a specified volume.
aaa\bbb
User Name
When a user name is required to be input by the forwarding destination server, set the user
name.